Hayward Pool heater LO Error Code
What the LO code means
On Hayward Universal H-Series gas pool heaters, LO means the limit string is open - the water pressure switch, vent pressure switch or temperature limit switch has opened and shut the heater down. It is not a low-temperature reading.
Likely causes
- low or no water flow - pump off, dirty filter or closed valves
- failed water pressure switch
- vent pressure switch fault
- temperature limit switch open from overheating
How to fix it — step by step
- Note that LO with the pump off can be normal - start the pump first
- Clean or backwash the filter and empty skimmer and pump baskets
- Open all valves to the heater fully and confirm strong flow at the returns
- Let the heater auto-restart about 2 minutes after flow is restored
- If LO persists with proven good flow, call a pool/spa technician - never bypass a limit switch
Parts that commonly fix the LO code
- water pressure switch - Shop at RepairClinic
- vent pressure switch - Shop at RepairClinic
- temperature limit switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.