Goodman Furnace EEn Error Code
What the EEn code means
Igniter open on newer Goodman single-stage furnaces with the alphanumeric display control. The igniter circuit is open, so the furnace cannot light.
Likely causes
- burned-out or cracked hot surface igniter
- loose or disconnected igniter wiring
How to fix it — step by step
- Check the thermostat is set to Heat and the furnace power switch and breaker are on
- Confirm the manual gas shutoff valve near the furnace is open (handle parallel to the pipe)
- Turn power off for 30 seconds, then back on, and allow one retry cycle
- Do not keep resetting a furnace that repeatedly fails to light
- If it locks out again, call a licensed HVAC technician and note the code
Parts that commonly fix the EEn code
- hot surface igniter - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.