GE Washer IE Error Code

What the IE code means

Water level sensor error on GE WSL model washers (PartSelect). Note the same letters are used on newer GE washers as a Consumer Help Indicator for water not entering - check your model's manual.

Likely causes

  1. Failed pressure / water level sensor switch
  2. Loose or damaged wiring harness to the sensor
  3. Control board fault
  4. No water entering the washer (newer-model meaning)

How to fix it — step by step

  1. Press Power and check both water supply valves are on
  2. Unplug the washer for a few minutes, then retry once
  3. Make sure fill hoses are not kinked and inlet screens are clear
  4. If IE returns, the sensor, harness or board needs professional testing

Parts that commonly fix the IE code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related GE washer error codes

See all GE washer codes & guides →