GE Washer E22 Error Code
What the E22 code means
Fill timeout on GE front-load washers: the washer did not fill, or filled too slowly, and timed out (about 8 minutes).
Likely causes
- Water supply valves behind the washer not fully open
- Clogged inlet valve screens or kinked fill hoses
- Low household water pressure or frozen fill lines in winter
- Drain siphon problem draining water as it fills
- Failed water inlet valve assembly
How to fix it — step by step
- Make sure both hot and cold supply valves behind the washer are fully open
- Straighten any kinked fill hoses and check the drain hose is not pushed too far into the standpipe (siphoning)
- Unplug the washer, turn off the water, and clean the sediment screens in the inlet hose connections
- Restart a cycle and watch whether it fills at a normal rate
Parts that commonly fix the E22 code
- water inlet valve assembly - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.