GE Washer E30 Error Code
What the E30 code means
No drain on GE front-load washers: the control does not detect the drain pump running or the washer cannot drain at all.
Likely causes
- Clogged drain pump (large-item) filter
- Excess suds blocking drainage
- Kinked or blocked drain hose
- Failed drain pump
How to fix it — step by step
- Unplug the washer
- Open the small access door at the bottom front and clean the drain pump filter / large-item trap over a shallow pan
- Check the drain hose for kinks and make sure the house drain is clear
- Reduce detergent if the load was very sudsy, then retry a Drain & Spin cycle
Parts that commonly fix the E30 code
- drain pump - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.