GE Washer E23 Error Code

What the E23 code means

Flood-protect / overfill fault on GE front-load washers: the washer detected too much water, or the foam/level switch closed while the washer was idle, and ran a protective drain.

Likely causes

  1. Water inlet valve not shutting off properly
  2. Failed water level (pressure) sensor giving a false high reading
  3. Excess suds from too much or non-HE detergent fooling the level sensing
  4. Loose or damaged wiring to the water level sensor

How to fix it — step by step

  1. Turn off both water supply valves and unplug the washer
  2. If the tub is overfilled, let it drain and check whether water keeps entering with the power off - if it does, keep the valves shut
  3. Use less HE detergent and run a rinse to clear excess suds
  4. Do not keep running cycles if the code returns

Parts that commonly fix the E23 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related GE washer error codes

See all GE washer codes & guides →