Electrolux Washer E35 Error Code

What the E35 code means

Water overfill: the pressure sensor has detected that the water level in the machine has exceeded normal levels.

Likely causes

  1. Water inlet valve stuck open or faulty
  2. Leak in the pressure switch hydraulic circuit
  3. Faulty pressure switch
  4. Control board fault

How to fix it — step by step

  1. Turn off the water supply right away
  2. If the washer fills while unplugged, the inlet valve is stuck and needs replacing
  3. Let the machine run its safety drain if it starts one
  4. Book service to test the valve and pressure switch

Parts that commonly fix the E35 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Electrolux washer error codes

See all Electrolux washer codes & guides →