Electrolux Washer E62 Error Code

What the E62 code means

Overheating during washing: the water temperature rose too high (above about 88 degrees C) during the wash.

Likely causes

  1. Failed NTC temperature sensor
  2. Heating element fault or stuck heater relay
  3. Hot and cold hoses reversed
  4. Control board fault

How to fix it — step by step

  1. Stop the cycle and unplug the washer
  2. Check the fill hoses are on the correct taps (cold to cold)
  3. Do not run hot cycles until it is checked
  4. Book service to test the temperature sensor and heater circuit

Parts that commonly fix the E62 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Electrolux washer error codes

See all Electrolux washer codes & guides →