Electrolux Washer E42 Error Code

What the E42 code means

Door lock device failure: there is a problem closing or opening the door lock, and the door may stay locked or fail to lock.

Likely causes

  1. Failed door interlock
  2. Door lock wiring fault
  3. Control board fault

How to fix it — step by step

  1. Wait a few minutes, since the lock releases with a delay after a cycle
  2. Unplug the washer for 5 minutes and try again
  3. Do not force the door open
  4. Book service to test and replace the door lock if needed

Parts that commonly fix the E42 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Electrolux washer error codes

See all Electrolux washer codes & guides →