Carrier Furnace 46.1 Error Code
What the 46.1 code means
Momentary loss of power on Carrier furnaces with the 3-digit status display, such as the 58SC0B/58SC1B. The LED flashes major code 46 while the display reads 46.1: heating stopped because of a brief power interruption or brownout, and it restarts on its own once the power fluctuation is resolved. This is a status code, not a failure.
Likely causes
- Brownout or brief utility power interruption
- Loose 115 V connection or failing door switch (if it happens often with no outage)
How to fix it — step by step
- No action is needed if you just had a power blip - the furnace restarts by itself
- Check the furnace breaker is fully seated and the service switch is firmly on
- Note how often it happens
- If 46.1 appears often with no utility outages, have a technician check for a loose power connection
Parts that commonly fix the 46.1 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.