Carrier Furnace Rapid flashing
What this problem usually means
On Carrier 58-series furnaces, a status LED that flashes rapidly and continuously with no pause means the line-voltage (115 VAC) polarity is reversed at the furnace. The control cannot prove flame with reversed polarity, so the furnace will not run.
Likely causes
- Hot and neutral wires reversed at the furnace, a junction box or an outlet
- Incorrect 24 V transformer phasing on twinned furnaces
How to fix it — step by step
- Note the flash pattern before turning anything off, so you can tell the technician
- Turn the furnace off at the service switch and leave it off
- Do not open junction boxes or swap wires yourself - this is live 115 V wiring
- Call an HVAC technician or electrician to find and correct the reversed polarity
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.