Bryant Furnace 27 Error Code
What the 27 code means
Super plug program fault on Bryant furnaces with a 3-digit status display, such as the 926TC and 912SE. The program in the super plug is missing, not recognized, or corrupted (minor codes 27.1, 27.2 and 27.3).
Likely causes
- Super plug missing
- Super plug program not recognized or corrupted
How to fix it — step by step
- Note the code for the technician
- Do not remove or swap plugs inside the control yourself
- Call a technician - the manual's steps are to remove the super plug and retry, try a different super plug, and replace the control if the code persists
Parts that commonly fix the 27 code
- control board - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.