Bryant Furnace 44 Error Code

What the 44 code means

Blower calibration fault on Bryant variable-speed furnaces such as the 355MAV. The calculated blower speed is below 250 RPM or above 1300 RPM; the owner's diagnostic chart points first to a dirty filter or blocked grilles, and repeated occurrences can become code 12 blower calibration lockout.

Likely causes

  1. Dirty air filter causing excessive static pressure
  2. Blocked return-air or supply-air grilles
  3. Undersized ductwork or excessive duct static pressure
  4. Blower motor or wiring fault

How to fix it — step by step

  1. Replace a dirty air filter
  2. Open all supply registers and clear blocked return grilles
  3. Cycle power once at the service switch
  4. If 44 returns or becomes code 12 lockout, call a technician to check duct static pressure and the blower

Parts that commonly fix the 44 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bryant furnace error codes

See all Bryant furnace codes & guides →