Bryant Furnace 19.1 Error Code

What the 19.1 code means

InteliSense communication loss on Bryant furnaces such as the 926TC that use an ecobee for Bryant thermostat. The LED flashes 1 short and 9 long while the display reads 19.1: the furnace control has lost communication with the thermostat.

Likely causes

  1. Loose or broken low-voltage wire connections between the control and the thermostat
  2. Thermostat not configured for InteliSense

How to fix it — step by step

  1. Check that the thermostat still powers on and responds
  2. Replace the thermostat's batteries if it uses them
  3. Note the code for your dealer
  4. Call a technician - the thermostat wiring and InteliSense setup should be checked by the installing dealer

Parts that commonly fix the 19.1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bryant furnace error codes

See all Bryant furnace codes & guides →