Whirlpool Washer HC Error Code

What the HC code means

Hot and cold inlet hoses are reversed: the cold hose is on the hot inlet and the hot hose is on the cold inlet. The code appears at the end of the wash cycle.

Likely causes

  1. Hot and cold fill hoses installed on the wrong inlets
  2. Supply lines crossed at the wall faucets during installation or a hose replacement

How to fix it — step by step

  1. Turn off the water supply
  2. Swap the hot and cold hoses so each connects to the correct inlet
  3. Turn the water back on and check for leaks
  4. Run another cycle to verify the code does not return

Parts that commonly fix the HC code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool washer error codes

See all Whirlpool washer codes & guides →