Whirlpool Washer Lo FL
What this problem usually means
Low flow: the washer is sensing a low flow of water during fill, the same fault shown as F8 E1 on other models.
Likely causes
- Faucets not fully open
- Kinked inlet hoses
- Clogged inlet screens
- Anti-flood hose/device restricting flow
How to fix it — step by step
- Open both hot and cold faucets fully
- Straighten inlet hoses and clean inlet screens
- Remove anti-flood devices from the water line
- Press Pause/Cancel twice and Power once to clear (front-load)
Parts that commonly fix it
- water inlet valve - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.