Whirlpool Washer F7 E1 Error Code

What the F7 E1 code means

Motor speed sensing error: the motor cannot achieve or report the correct speed for the selected cycle; on belt-drive top-load models this is a basket speed sensor fault.

Likely causes

  1. Shipping bolts not removed (front-load, new install)
  2. Washer overloaded
  3. Basket does not rotate freely / drive fault
  4. Failed shifter/speed sensor assembly

How to fix it — step by step

  1. Check all shipping bolts have been removed
  2. Remove some items if the load is large and redistribute it
  3. Check the basket spins freely by hand with the washer off
  4. Press Pause/Cancel twice and Power once to clear, then retry
  5. Unplug for 5 minutes if the code does not clear

Parts that commonly fix the F7 E1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool washer error codes

See all Whirlpool washer codes & guides →