Whirlpool Dishwasher F8 E4 Error Code
What the F8 E4 code means
Water detected in the drip tray under the tub: the leak / overfill float switch has tripped, the drain sequence begins and the dishwasher will not run.
Likely causes
- Leaking water supply connection, especially after a recent install
- Water leaking into the drip tray from a hose or pump seal
- Excess suds from regular dish soap overflowing into the tray
How to fix it — step by step
- Press Cancel once to silence the alarm; turn off the water supply to the dishwasher if you can and keep the door closed
- Empty the drip tray and check the float switch is connected
- Check the water connections for leaks and tighten a dripping fitting by hand
- Use only dishwasher detergent; if the code returns, schedule service to find the leak
Parts that commonly fix the F8 E4 code
- float switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.