Raypak Pool heater Sensor Failure

What this problem usually means

On Raypak Digital gas pool heaters (206A-406A), Sensor Failure means the heater's two temperature thermistors disagree by more than 2F, so the control cannot trust the water temperature reading.

Likely causes

  1. drifting or failed thermistor
  2. damaged sensor wiring
  3. corroded sensor connector at the board

How to fix it — step by step

  1. Turn power to the heater off at the breaker
  2. Note the exact message for the technician
  3. Do not bypass the sensor
  4. Call a pool technician to test the thermistors and wiring and replace the sensor if needed

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Raypak pool heater problems

See all Raypak pool heater codes & guides →