Jandy Pool heater FAULT- CHECK IGN CONTROL Error Code

What the FAULT- CHECK IGN CONTROL code means

On Jandy JXi gas pool heaters, FAULT- CHECK IGN CONTROL means the ignition control could not establish or prove a flame, covering air flow, igniter and gas supply problems.

Likely causes

  1. damaged air pressure switch tubing
  2. fan stopped or running slow
  3. restricted air intake or vent
  4. broken igniter
  5. low gas pressure or volume
  6. no flame at the burner

How to fix it — step by step

  1. Turn the heater off
  2. Check the vent and air intake are clear of debris from outside the cabinet
  3. Confirm the manual gas shutoff valve by the heater is open
  4. Try one restart only
  5. If it locks out again, stop and call a qualified gas pool heater technician

Parts that commonly fix the FAULT- CHECK IGN CONTROL code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Jandy pool heater error codes

See all Jandy pool heater codes & guides →