iRobot Robot vacuum Error 25

What this problem usually means

An internal board or internal communication error. iRobot's documented first fix is to reboot the robot.

Likely causes

  1. Temporary internal board fault
  2. Internal communication glitch

How to fix it — step by step

  1. Reboot the robot
  2. Press CLEAN to restart the job once it powers back up
  3. Run a short test job to check the error has cleared
  4. Contact iRobot Customer Care if it returns after rebooting

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related iRobot robot vacuum problems

See all iRobot robot vacuum codes & guides →