iRobot Robot vacuum Error 3
What this problem usually means
Uneven ground: Roomba is on an obstacle or uneven surface and its right wheel is hanging down or stuck.
Likely causes
- Robot on an obstacle or uneven surface
- Right wheel hanging down or stuck
- Debris trapped in the right wheel well
How to fix it — step by step
- Move Roomba to a flat surface and press CLEAN to restart
- Push the right wheel up and down several times and shake out loose debris
- Turn both wheels by hand and check they turn freely with the same resistance
- Clear the obstacle or area where the wheel lost contact with the floor
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.