iRobot Robot vacuum Error 36

What this problem usually means

Empty the bin: the bin full sensor was not cleared when the debris was evacuated, so Roomba still thinks the bin is full.

Likely causes

  1. Bin full sensors still dirty after emptying
  2. Debris left in the bin
  3. Bin not reinstalled correctly after emptying

How to fix it — step by step

  1. Remove the bin and empty it completely
  2. Wipe the bin full sensor windows on the bin and robot clean
  3. Reinstall the bin firmly
  4. Press CLEAN to restart

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related iRobot robot vacuum problems

See all iRobot robot vacuum codes & guides →