iRobot Robot vacuum Error 2

What this problem usually means

The main brushes cannot turn. On i, j and s series robots this is the multi-surface rubber brushes; on older series it is the main brushes or debris extractors.

Likely causes

  1. Hair or debris wrapped around the brushes or their ends
  2. Brushes jammed or not seated correctly
  3. Thick carpet stalling the brushes

How to fix it — step by step

  1. Open the brush cage and remove the brushes or extractors
  2. Clear hair and debris from the brushes, their ends and bearings
  3. Reinstall the brushes and close the cage
  4. Test on a hard floor if it happened on thick carpet, then press CLEAN to restart

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related iRobot robot vacuum problems

See all iRobot robot vacuum codes & guides →