GE Dishwasher C4 Error Code

What the C4 code means

On GE dishwashers with electronic controls, C4 means the machine filled twice after a power failure, which GE attributes to a stuck or failed float switch or a clogged drain or sump.

Likely causes

  1. Float switch stuck in the raised position
  2. Failed float switch
  3. Clogged drain or sump keeping water in the tub
  4. Debris under the float cover

How to fix it — step by step

  1. Touch Start, then Cancel/Reset
  2. Tap on the float cover (the upside-down cup in the front left corner of the tub floor) to un-stick the float
  3. Check the sump area at the back bottom of the tub for debris and clear it
  4. Restart a cycle and confirm the tub fills and drains normally
  5. If C4 repeats, contact service

Parts that commonly fix the C4 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related GE dishwasher error codes

See all GE dishwasher codes & guides →