GE Dishwasher C5 Error Code

What the C5 code means

On GE dishwashers with electronic controls, C5 means the pump-out time is too short, which usually points to a low-water or float problem rather than a drain blockage.

Likely causes

  1. Water supply turned off or partly closed
  2. Float switch stuck
  3. Low household water pressure
  4. Failing water inlet valve

How to fix it — step by step

  1. Make sure the water supply valve to the dishwasher is fully turned on
  2. Tap on the float cover (front left corner of the tub floor) to un-stick the float
  3. Try running the same cycle again
  4. Check that the inlet hose is not kinked
  5. If C5 returns, contact service to check the inlet valve

Parts that commonly fix the C5 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related GE dishwasher error codes

See all GE dishwasher codes & guides →