GE Dishwasher C3 Error Code

What the C3 code means

On GE dishwashers with electronic controls, C3 means the dishwasher will not drain at all and cannot switch into the drain mode.

Likely causes

  1. Control glitch after a power interruption
  2. Blocked drain path, filter or sump
  3. Failed drain pump
  4. Failed main control

How to fix it — step by step

  1. Turn off power at the circuit breaker for about 30 seconds, then restore power to reset the dishwasher
  2. Clean the filter and check the sump area for debris
  3. Clean the air gap and run the disposer
  4. Run a short cycle and watch whether any water pumps out
  5. If C3 persists after the reset, contact service

Parts that commonly fix the C3 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related GE dishwasher error codes

See all GE dishwasher codes & guides →