Frigidaire Washer E24 Error Code

What the E24 code means

The drain pump relay circuit on the control board has failed, or a wire is off the drain pump (same drain-pump circuit fault family as E23).

Likely causes

  1. Failed drain pump relay on the control board
  2. Wire disconnected from the drain pump
  3. Failed drain pump

How to fix it — step by step

  1. Unplug the washer for 5 minutes and restart one cycle
  2. Clean the drain pump filter and check the drain hose is clear
  3. If the code returns right away, stop and book service
  4. A technician will test the pump circuit and replace the board or pump as needed

Parts that commonly fix the E24 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Frigidaire washer error codes

See all Frigidaire washer codes & guides →