Frigidaire Washer E35 Error Code

What the E35 code means

The water level pressure sensor detects an overfill: there is too much water in the tub.

Likely causes

  1. Water inlet valve stuck open
  2. Failed or clogged pressure sensor or its air hose
  3. Control board fault

How to fix it — step by step

  1. Turn off the water supply faucets right away
  2. If the washer keeps filling while unplugged, the inlet valve is stuck and needs replacing
  3. Unplug the washer and let it drain or bail out excess water
  4. Book service if the valve is not stuck, to test the pressure sensor

Parts that commonly fix the E35 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Frigidaire washer error codes

See all Frigidaire washer codes & guides →