Sundance Spas Hot tub HOT Error Code

What the HOT code means

On Sundance Spas 880 Series hot tubs, HOT means the circuit board temperature has exceeded its acceptable limit. The message disappears when the board temperature drops back below the limit.

Likely causes

  1. equipment compartment overheating in hot sun
  2. poor ventilation around the equipment side
  3. direct sun on the equipment bay

How to fix it — step by step

  1. Leave the spa powered but do not open the equipment compartment near water
  2. Provide shade for the equipment side of the hot tub if the message persists
  3. Wait for the message to clear as the board cools
  4. Contact your Sundance Spas dealer if HOT appears repeatedly

Parts that commonly fix the HOT code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Sundance Spas hot tub error codes

See all Sundance Spas hot tub codes & guides →