Sundance Spas Hot tub OH Error Code

What the OH code means

On Sundance Spas 880 Series hot tubs, OH is overheat protection: water temperature is above acceptable limits (a sensor has detected about 112F / 44C), the heater is deactivated and the circulation pump is activated. Do not enter the water.

Likely causes

  1. water overheated above the safe limit
  2. hot weather plus a high set point
  3. faulty temperature sensor
  4. restricted flow

How to fix it — step by step

  1. Do not enter the water - risk of hyperthermia
  2. Remove the hot tub cover to speed cooling
  3. Check the water temperature with a separate thermometer before reuse
  4. Turn power off and contact your Sundance Spas dealer or a qualified spa technician if the condition persists

Parts that commonly fix the OH code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Sundance Spas hot tub error codes

See all Sundance Spas hot tub codes & guides →