Speed Queen Washer Er FL

What this problem usually means

Fill error on Speed Queen front-load washers: the washer has not reached the fill level within 30 minutes of a fill step.

Likely causes

  1. Water faucets closed or partly open
  2. Kinked or twisted fill hoses
  3. Clogged screens in the mixing valve or at the faucet end of the hoses
  4. Low water pressure or a pressure sensor hose air leak

How to fix it — step by step

  1. Turn both faucets fully on
  2. Straighten the fill hoses
  3. Clean the inlet screens in the mixing valve and at the hose ends
  4. Unplug the washer for 15 seconds to clear the code and restart; call for service if it returns

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Speed Queen washer problems

See all Speed Queen washer codes & guides →