Speed Queen Washer Er dr

What this problem usually means

Drain error on Speed Queen front-load washers: water is still in the washer at the end of the cycle, per Speed Queen's front-load user guide (FLW1548C). The control also enters error mode if water is not below empty after about 2 minutes of draining on electronic models.

Likely causes

  1. Blocked drain hose or standpipe
  2. Clogged foreign-object trap in the pump
  3. Kinked drain hose
  4. Failed drain pump

How to fix it — step by step

  1. Check the drain hose and the standpipe or floor drain for blockages
  2. Clean the pump foreign-object trap as your manual shows
  3. Straighten any kink in the drain hose
  4. Unplug the washer briefly to clear the code and restart; call for service if Er dr returns

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Speed Queen washer problems

See all Speed Queen washer codes & guides →