Samsung Washer OE Error Code
What the OE code means
Overflow error: there is too much water in the washer. This is an older display form of the newer OC code (also shown as OF on some models).
Likely causes
- Too much detergent causing excess suds and a false level reading
- Water inlet valve stuck open
- Faulty water level / pressure sensor
- Drain hose siphoning or installed incorrectly
How to fix it — step by step
- Switch off the power for 1 minute, then switch back on so the drain pump can drain the washer
- Turn off the water taps if the tub keeps filling with the washer off
- Check the drain hose height and that it is not pushed too far into the standpipe
- Use less HE detergent on the next cycle and run an empty rinse
Parts that commonly fix the OE code
- water inlet valve - Shop at RepairClinic
- water level sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.