Samsung Washer PF Error Code

What the PF code means

Power failure / voltage error: power went out, the washer was unplugged, or the breaker tripped before the washer powered itself off. Samsung lists PF in its voltage-error group.

Likely causes

  1. Irregular or low supply voltage
  2. Washer on a shared circuit or extension cord
  3. Power outage / breaker trip during a cycle (PF)
  4. Washer used on a power grid it was not made for

How to fix it — step by step

  1. Plug the washer directly into its own wall outlet - do not use an extension cord
  2. Check the breaker has not tripped and reset it if needed
  3. Unplug for 1 minute, restore power and start a new programme
  4. Check the power cord is plugged in properly

Parts that commonly fix the PF code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung washer error codes

See all Samsung washer codes & guides →