Samsung Washer CE Error Code
What the CE code means
Hot/cold error: the cold water supply is extremely hot, which Samsung lists with 4C2 and 4E2 and says usually means the supply hoses are swapped.
Likely causes
- Hot and cold supply hoses swapped at the inlets
- Cold inlet connected to a hot supply
- Incoming water too hot for the selected delicate or wool cycle
How to fix it — step by step
- Turn off both supply taps
- Reconnect the hoses so cold (usually blue) goes to the cold inlet and hot (usually red) to the hot inlet
- Run a rinse cycle to confirm the code clears
- If the hoses were already correct, check that the cold tap is not supplying hot water
Parts that commonly fix the CE code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.