Samsung Washer E2 Error Code

What the E2 code means

Water drainage issue: water is not draining from the appliance. Samsung lists E2 as the old code paired with 5E / 5C.

Likely causes

  1. Clogged debris / pump filter
  2. Kinked, clogged or frozen drain hose
  3. Drain hose installed too low, too high or pushed too far into the standpipe
  4. Object lodged in the drain pump
  5. Failed drain pump

How to fix it — step by step

  1. Unplug the washer and, on front-load models, drain via the emergency hose and clean the debris filter
  2. Check the drain hose for kinks and blockages and straighten it to the drain
  3. Make sure the drain hose is at the correct height and not sealed airtight in the standpipe
  4. Remove any coins, lint or small items found in the filter housing
  5. Plug back in and run a spin cycle to drain remaining water

Parts that commonly fix the E2 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung washer error codes

See all Samsung washer codes & guides →