Samsung Washer 4E2 Error Code

What the 4E2 code means

The water from the cold supply is extremely hot, usually because the hot and cold hoses are swapped. This is an older form of the newer 4C2 hot/cold error.

Likely causes

  1. Hot and cold supply hoses swapped at the inlets
  2. Cold inlet connected to a hot supply
  3. Incoming water too hot for the selected delicate or wool cycle

How to fix it — step by step

  1. Turn off both supply taps
  2. Reconnect the hoses so cold (usually blue) goes to the cold inlet and hot (usually red) to the hot inlet
  3. Run a rinse cycle to confirm the code clears
  4. If the hoses were already correct, check that the cold tap is not supplying hot water

Parts that commonly fix the 4E2 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung washer error codes

See all Samsung washer codes & guides →