Samsung Washer 4C Error Code
What the 4C code means
Water is not supplied to the washer, or it is not filling correctly. This is the newer display form of the older 4E and nF not-filling codes.
Likely causes
- Water supply taps closed or only partly open
- Kinked, clogged or frozen inlet hose
- Clogged inlet mesh filter screen
- Low household water pressure
- Failed water inlet valve
How to fix it — step by step
- Make sure both hot and cold taps are fully open
- Straighten the inlet hoses and check they are connected hot-to-hot and cold-to-cold
- Turn off the water, disconnect the hoses and clean the mesh filter screens at the washer inlets
- Check the drain hose is only 6-8 inches into the standpipe so water is not siphoning out
- Unplug the washer for 1 minute, restore power and restart a cycle
Parts that commonly fix the 4C code
- water inlet valve - Shop at RepairClinic
- inlet hose - Shop at RepairClinic
- water level sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.