Maytag Washer HC Error Code
What the HC code means
The hot and cold inlet hoses have been installed reversed: the cold hose is on the hot inlet and the hot hose is on the cold inlet. The code appears at the end of the wash cycle.
Likely causes
- Hot and cold hoses swapped at installation
- Hoses moved and reconnected incorrectly
How to fix it — step by step
- Turn off the water supply
- Swap the hoses so hot connects to hot and cold to cold
- Turn the water back on and check for leaks
- Run another cycle to verify the code is gone
Parts that commonly fix the HC code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.