Jeep Wrangler Engine misfiring

What this problem usually means

The 2012-2013 Wrangler with the 3.6L Pentastar has a documented left cylinder head failure that causes misfires, often with a check engine light for a single cylinder; it failed so often that Chrysler extended the warranty on the head. A persistent single-cylinder misfire on a 2012-2013 Pentastar that survives new plugs and a coil swap should be compression-tested for this fault.

Likely causes

  1. Left cylinder head valve seat failure (2012-2013 3.6L)
  2. Worn spark plugs or a failed ignition coil (rule out first, far cheaper)
  3. Fuel injector fault on the misfiring cylinder
  4. Carbon buildup or a vacuum leak (usually affects idle quality more broadly)

How to fix it — step by step

  1. Read the misfire code and identify the cylinder
  2. Swap the coil and plug with another cylinder and see whether the misfire follows them; if it stays on the same cylinder, the problem is in that hole
  3. Run a compression and leak-down test on the suspect cylinder
  4. A confirmed head fault is major engine work; ask a dealer whether the extended head coverage ever applied or was already used on your Jeep

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Jeep Wrangler problems

See all Jeep Wrangler codes & guides →