Jacuzzi Hot tub HOT Error Code
What the HOT code means
On Jacuzzi J-300 Collection hot tubs, HOT means Jets Pump 1 has activated to circulate water through the heater because the water is getting too hot. After 5 minutes the display changes to T--OH.
Likely causes
- water approaching the overheat limit
- summer heat plus a high set temperature
- restricted flow overheating the heater
How to fix it — step by step
- Do not enter the spa
- Remove the cover to let the water cool
- Wait for the display to clear as the water cools
- Contact your Jacuzzi dealer or a qualified spa technician, as the manual directs for this message
Parts that commonly fix the HOT code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.