iRobot Robot vacuum Error 9

What this problem usually means

Constant bump: the bumper is jammed with debris or dislodged, so Roomba reads it as permanently pressed. On 600 series robots the bumper may be compressed or its sensor dirty.

Likely causes

  1. Debris jammed in or behind the bumper
  2. Bumper dislodged
  3. Dirty bumper sensor

How to fix it — step by step

  1. Tap the bumper repeatedly to unstick it
  2. Check around and behind the bumper and remove any trapped debris
  3. Confirm the bumper clicks in and out freely on both sides
  4. Press CLEAN to restart

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related iRobot robot vacuum problems

See all iRobot robot vacuum codes & guides →