Bosch Oven Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 23 codes covered.
Shop Bosch Oven parts at RepairClinic
- E000 — Wrong module combination on 300, 500 and 800 Series built-in wall ovens: the control module and user interface are mismatched, usually…
- E003 — The electronics are too hot on 300, 500 and 800 Series built-in wall ovens: the user interface temperature exceeds about 185F / 85C and…
- E005 — Communication error: the user interface has lost communication with the control module (power board) at start-up. Freestanding Bosch ranges…
- E009 — ROM check error in the user interface on 300, 500 and 800 Series built-in wall ovens: the interface is not getting all information from the…
- E010 — Data memory error in the user interface on 300, 500 and 800 Series built-in wall ovens: a memory check or write failed and all heating…
- E011 — A single key is being read as pressed continuously on built-in ovens - in the wall oven service manual this is a key pressed for about 10…
- E100 — An electronics fault on Bosch electric freestanding ranges. The code reports a general electronics problem and does not by itself identify…
- E101 — The oven temperature sensor is malfunctioning. On freestanding ranges Bosch lists e101 as the appliance temperature sensor fault; in the…
- E104 — The cavity 1 temperature sensor is shorted on 300, 500 and 800 Series built-in wall ovens (E204 is the same fault for cavity 2). Heating…
- E106 — The cavity 1 door latch does not lock on 300, 500 and 800 Series built-in wall ovens (E206 is the same fault for cavity 2), so modes that…
- E107 — The cavity 1 door latch does not unlock on 300, 500 and 800 Series built-in wall ovens (E207 is the same fault for cavity 2) - the door may…
- E11 — The touch keys are not operating properly on Bosch ovens and microwaves, which Bosch Canada says may be due to condensation on the keypad.…
- E115 — The temperature in the unlocked cavity is too high on 300, 500 and 800 Series built-in wall ovens (E215 is the same fault for cavity 2). UK…
- E118 — Cooling fan supervision error for cavity 1 on 300, 500 and 800 Series built-in wall ovens (E218 for cavity 2): the cooling fan speed is too…
- E124 — Door switch error for cavity 1 on 300, 500 and 800 Series built-in wall ovens (E224 for cavity 2): the door switch is in an undefined…
- E126 — Door latch error: on built-in wall ovens E126 is a cavity 1 door latch in an undefined state (E226 for cavity 2), and freestanding Bosch…
- E302 — The control module / power board has overheated. In the 800 Series wall oven service information E302 is a control module that is too hot -…
- E303 — The electronics are too hot at the control module on 300, 500 and 800 Series built-in wall ovens: the control module temperature exceeds…
- F121 — A key on the control panel is stuck on Bosch ranges in the Sears PartsDirect list. The control reads a continuous key press and will not…
- F151 — Electronic control board failure or a communication error on Bosch ranges in the Sears PartsDirect list.
- F154 — The electronic control board is too hot on Bosch ranges in the Sears PartsDirect list.
- F31 — Oven temperature sensor failure on Bosch ranges in the Sears PartsDirect list (upper or single oven sensor). The control cannot read oven…
- F41 — The oven door latch will not lock on Bosch ranges in the Sears PartsDirect list, so self-clean cannot start.