Bosch Dishwasher E18 Error Code

What the E18 code means

There is a problem with water flow into the dishwasher: the water level is too low, or water is not being pumped correctly. Older lists called this an underfill fault.

Likely causes

  1. water supply tap not fully open or low flow rate
  2. kinked or damaged inlet hose
  3. blocked inlet filter
  4. filling or circulation fault

How to fix it — step by step

  1. Check the inlet hose is not kinked or damaged
  2. Make sure the water supply is fully turned on - Bosch specifies a flow rate of about 10 litres per minute
  3. Clean the inlet hose filter screen, then run a cycle; book service if the code returns

Parts that commonly fix the E18 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch dishwasher error codes

See all Bosch dishwasher codes & guides →