Bosch Dishwasher E24 Error Code

What the E24 code means

The dishwasher is not draining properly, which Bosch attributes first to a blocked drain filter. A kinked drain hose or a blocked disposal connection gives the same symptom.

Likely causes

  1. blocked drain filter
  2. kinked or blocked drain hose, or clogged air gap
  3. drain pump cover loose
  4. garbage disposal knockout plug not removed on a new disposal

How to fix it — step by step

  1. Remove and clean the filter under running water
  2. Check the drain hose under the sink for kinks and check the pump cover under the filter is seated
  3. If connected to a garbage disposal, make sure the plug was removed from the disposal drain connection
  4. Run a cycle; if water still stands in the tub, book service

Parts that commonly fix the E24 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch dishwasher error codes

See all Bosch dishwasher codes & guides →