Bosch Dishwasher E11 Error Code
What the E11 code means
On older Bosch models, the thermostat or temperature sensor (NTC thermistor) is faulty, so the dishwasher cannot read water temperature correctly. This code is not on Bosch's current US list.
Likely causes
- failed NTC temperature sensor / thermistor
- damaged sensor wiring
- control board sensor circuit fault
How to fix it — step by step
- Turn off power at the breaker or unplug for 5 minutes, then restart
- Run a hot cycle and check whether the code returns
- If it returns, book a technician - the sensor needs testing and usually replacing
Parts that commonly fix the E11 code
- temperature sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.