Whirlpool Refrigerator Demo Error Code

What the Demo code means

Demo / showroom mode is on (display may read Demo, Showroom or Shwrm): the display and lights work normally but the compressor and fans stay off or barely run, so nothing gets cold. It is a retail display setting, not a fault.

Likely causes

  1. Former store display unit installed without exiting demo mode
  2. Demo mode turned on accidentally by a button combination
  3. Cooling-off button sequence used instead of the demo exit sequence

How to fix it — step by step

  1. Find your model's demo exit sequence in the owner's manual - it varies by control type
  2. Common Whirlpool methods hold a pair such as LIGHT + LOCK, or FREEZER TEMP + REFRIGERATOR TEMP, for 3-5 seconds until the display counts down
  3. Confirm the Demo / Showroom wording clears and cooling starts, then recheck temperatures after a few hours

Parts that commonly fix the Demo code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool refrigerator error codes

See all Whirlpool refrigerator codes & guides →