Whirlpool Dryer L2 Error Code

What the L2 code means

Low or no line voltage: a problem with the home power supply may be keeping the dryer's heater from turning on. The dryer keeps running while this code is shown, and it normally only appears at initial installation.

Likely causes

  1. Blown household fuse or tripped breaker on one leg of the supply
  2. Power cord not properly installed
  3. Faulty outlet or home wiring

How to fix it — step by step

  1. Touch any pad to clear the code
  2. Check for a blown fuse or tripped breaker - electric dryers use two fuses/breakers - and replace/reset
  3. Confirm the power cord is properly installed per the installation instructions
  4. Select a Timed Dry heated cycle and restart; if the message persists, consult a qualified electrician

Parts that commonly fix the L2 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool dryer error codes

See all Whirlpool dryer codes & guides →