Tesla Model 3 Squeaking noise over bumps
What this problem usually means
The Model 3's most famous noise: the front upper control arm ball joints were under-greased from the factory and let water in, so they dry out and creak or squeak loudly when turning at low speed or crossing bumps, typically between 40,000 and 100,000 km. Tesla revised the arm design mid-2020 with a sealed joint, and issued a service bulletin (SB-20-31-006) to reseal earlier joints.
Likely causes
- Dry, water-contaminated front upper control arm ball joints
- Worn fore-link (compression rod) bushings causing clunks over sharp bumps
- Worn sway bar links (a similar noise, cheaper part)
- Lower control arm ball joint wear on early cars
How to fix it — step by step
- Reproduce it: turn the wheel lock to lock while stationary and crawl over a speed bump with the windows down; a creak from the front wheel arch is the signature
- Ask Tesla whether the reseal bulletin or goodwill replacement applies; arms were often replaced free even out of warranty
- Inspect the ball joint boots for cracking or grease loss to confirm which side is noisy
- Replacement arms are a bolt-on suspension job; get an alignment afterward
Parts that commonly fix it
- front upper control arm - Shop at Amazon
- fore link (compression rod) - Shop at Amazon
- sway bar links - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.